Sony ICF-703 - Setting the Pointer

– 5 –
2-3. MAIN BOARD, LED BOARD
2-4. SETTING THE POINTER
1 knob (control)
8 BTP 3x10
9 BTP 3x10
7 claws
qa MAIN board
5 BTP 2.6x5
6 LED board
2 knob (band)
3 chassis
0
4 Removal the solder.
1 rack (pointer)
rack (pointer)
2 pointer
• Setting the Pointer
A
1. Turn the Knob (Tuning) in the direction of A until it is stopped.
2.Place the rack as shown in the figure.
3.Mount the pointer.