Sony ICF-C103 - Page 3

atclollom@lelcie-1iolamelit-leler-lmmaelaliare))
ALARM RESET/
RADIO
1 Press the SLEEP/RADIO ON button.
The band, frequency and the preset number of the station before
the radio was turned off appear in the display window. After 10
seconds, the indication becomes the current time.
| Ons/|- 5 90%]
2 Turn the VOL contro! a little to get sound.
3 Press the BAND button to select the band.
FM and AM with the last frequency selected in each band
appears alternately. :
~ ess} |
4 Tune in the station you want by pressing the TIME SET/
TUNE + or - button.
The FM tuning interval is set to 0.1 MHz and the AM tuning
interval is set to 10 kHz.
A beep sounds at the band edge.
5 Adjust volume. —_
To turn off the radio
Press the ALARM RESET/RADIO OFF button.
To improve reception
FM: Extend the FM wire antenna fully to increase the FM sensitivity.
AM: Since the reception is affected by the position of the radio, rotate
the unit horizontally for optimum reception.
To check the station you are listening to
Press the + button lightly. The band and frequency appear for 10
seconds.
¢ When you turn on the radio or change the frequency, the display
shows the band and frequency for 10 seconds, then it shows the
current time.
¢ When you tune in the frequency which is not included in the preset
stations, the PRESET number in the display shows 0 (out).
PRESET
Pu 8 ny ae
If the [ERADIO] alarm time comes while listening to the radio, the
station changes to that preset in number 1.
.
oe