Sony ICP-3000 - Page 176

USO RESTRITO
176
Applying Special Effects (Edge Effects)
No.
Parameter
Adjustment
1
H
Simultaneously adjust width of
left and right edges
2
V
Simultaneously adjust width of
top and bottom edges
3
All
Simultaneously adjust width of all
four edges
5
Density
Density of edges
No.
Parameter
Adjustment
1
Top
Width of top edge
2
Left
Width of left edge
3
Right
Width of right edge
4
Bottom
Width of bottom edge
5
Density
Density of edges
No.
Parameter
Adjustment
1
Top
Position of top edge
2
Left
Position of left edge
3
Right
Position of right edge
4
Bottom
Position of bottom edge
5
All
Adjust the position of all four
edges
Chapter
10
DME
Operations
2 Press [Art Edge], turning it on.
Notes
The Defocus, Blur, Key Border, and Glow effects
cannot be applied to the Art Edge sections.
3 Set the following parameters.
Example: Moving the right edge position in the “minus” direction.
Art edge portion
Parameter group [1/2]
Moving in the minus
direction
Parameter group [2/2]
Position after moving Position before moving
Adjusting the position of art edges
1 In the Art Edge menu (4114), press [Edge Position],
turning it on.
2 Adjust the following parameters.
Softening the inner and outer sides of art
edges
1 In the Art Edge menu (4114), press [Soft], turning it
on.
2 Adjust the following parameters.
No.
Parameter
Adjustment
1
Inner H
Simultaneously adjust softness of
left and right inner edges
2
Inner V
Simultaneously adjust softness of
top and bottom inner edges
3
Outer H
Simultaneously adjust softness of
left and right outer edges
4
Outer V
Simultaneously adjust softness of
top and bottom outer edges
5
All
Simultaneously adjust softness of
all inner and outer edges.
Setting the way in which art edge colors
change
1 In the <Art Edge Source> group of the Art Edge menu
(4114), select the color pattern to apply to the art
edges.
Flat Color: Uses Color 1 ( 1 p. 177) as a single color.
Gradation Matte: Color 1 changes to Color 2
( 1 p. 178) at the border lines (see step 2 ).
Rainbow Matte: The hue on the border lines
gradually changes as the color set as Color 1
changes to Color 2.