Applying Special Effects (Edge Effects) 179
Enlarge or shrink horizontally
Enlarge or shrink vertically
Enlarge or shrink horizontally and
vertically
Move the shadow center axis
horizontally
Move the shadow center axis
vertically
Chapter
10
DME
Operations
Mix Color:
Mix color signal set in the Color Mix
menu
(
1
p. 183)
Ext Video: An external video signal input to the Ext
IN connector
6
If [Flat Color] is selected in step 5, adjust the
following parameters.
When the default Axis Loc setting is used
xis Loc V
Axis Loc H
Shadow skewed with
Axis Loc set at the
lower left corner of the
picture
Shadow size and
perspective adjusted
with default Axis Loc
setting
Adjusting the size of the flex shadow
1
In the Flex/Drop Shadow menu (4115), press [Size],
turning it on.
2
Set the following parameters.
Shadow skewed with
Axis Loc set at the
midpoint on the left
edge of the picture
Image
Flex shadow
Axis Loc position
The flex shadow central axis appears when the [Flex
Shadow Axis] function is enabled in the Graphic menu.
For details,
1
“Displaying graphics” (p. 172).
a)
The Soft parameter is valid only when [Internal] is selected in the
<Flex Shadow Source> group.
Setting the center point of the flex shadow
1
In the Flex/Drop Shadow menu (4115), press [Axis
Loc], turning it on.
2
Adjust the following parameters.
Skewing the flex shadow
1
In the Flex/Drop Shadow menu (4115), press [Skew],
turning it on.
2
Adjust the following parameters.
Adding perspective to the flex shadow
1
In the Flex/Drop Shadow menu (4115), press
[Perspective], turning it on.
2
Adjust the following parameters.
Add horizontal perspective