GB
18
Selecting a function using the Fn
(Function) button
This button is used for setting up or executing functions used frequently in
shooting, except for functions from the Quick Navi screen. The displayed
contents and their position shown below are just a guideline, and may differ
from the actual display.
1 Press DISP on the control wheel to set the screen mode to other
than [For viewfinder].
2 Press the Fn button.
3 Select the desired item using v/V/b/B on the control wheel.
The setting screen appears.
4 Select the desired setting by
turning the control wheel, then
press z on the control wheel.
• Some setting values can be finely
adjusted by turning the control dial.
To set the individual settings in the
dedicated screen
In step 3, select a setting item and press z on
the control wheel to switch to the dedicated
screen for the setting item. Set the items
according to the Operation guide.
Operation guide
To Next Page
Loading...
