EasyManua.ls Logo

Sony ILCE-5100 - Dro Bracket

Sony ILCE-5100
217 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DRO Bracket:
Shoots a total of three images, each at a different degree of D-Range Optimizer.
[84] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Cont. Shooting
Shoots images continuously while you press and hold down the shutter button.
1. MENU (Camera Settings)[Drive Mode] [Cont. Shooting].
2. Select the desired mode using the right/left side of the control wheel.
Menu Item Details
Continuous Shooting: Hi (default setting):
Continuous shooting speed is set at a maximum of about 6 images per second.
Continuous Shooting: Lo:
Continuous shooting speed is set at a maximum of about 3 images per second.
Hint
To hold the focus and exposure during burst, change the following settings.
The exposure of the first shot is determined when you press the shutter button halfway
down. The exposure setting for the first shot is used for the subsequent shots.
Set [Focus Mode] to [Continuous AF] or [Automatic AF].
Set [
AEL w/ shutter] to [Off] or [Auto].
[85] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Self-timer
The product shoots an image using the self-timer with a 10-second or 2-second delay.
1. MENU (Camera Settings) [Drive Mode] [Self-timer].
2. Select the desired mode using the right/left side of the control wheel.
Menu item details

Table of Contents