ILCE-7RM4A
5-027-204-11(1)
GB
43
Shooting
\\Win-473\camera\CX88900(MGA)_CX88800(CQA)_IM\01_Compose\MGA_GB\5027204111\5027204111ILCE7RM4AUC2\01GB-ILCE7RM4AUC2\030BAS.indd
DTP data saved: 2020/11/30 16:43
PDF file created: 2020/11/30 18:05
Continuous shooting
Shoots images continuously while you press and hold down the shutter
button.
1
Select / (Drive Mode) on the control wheel
[Cont. Shooting].
• You can also set the drive mode by selecting MENU
(Camera Settings 1) [Drive Mode].
2
Select the desired mode using the right/left side of the control
wheel.
Continuous Shooting: Hi+: Images are shot continuously at the
maximum speed while you press and hold down the shutter button.
Continuous Shooting: Hi/ Continuous Shooting: Mid/
Continuous Shooting: Lo: Subjects are easier to track because
the subject is displayed in real-time on the monitor or viewfinder
during shooting.
Hint
• To continuously adjust the focus and exposure during continuous shooting,
set as follows:
– [Focus Mode]: [Continuous AF]
– [ AEL w/ shutter]: [Off] or [Auto]
Note
• The shooting speed during continuous shooting becomes slower when
[ RAW File Type] is set to [Uncompressed].
• The shooting speed during continuous shooting becomes slower when
[e-Front Curtain Shutter] is set to [Off] in [Continuous Shooting: Hi],
[Continuous Shooting: Mid] or [Continuous Shooting: Lo] mode.
• When the F-value is greater than F11 in [Continuous Shooting: Hi+],
[Continuous Shooting: Hi] or [Continuous Shooting: Mid] mode, the focus is
locked to the setting in the first shot.
• The subject is not displayed in real-time on the monitor or viewfinder when
shooting in [Continuous Shooting: Hi+] mode.
• The speed of continuous shooting decreases when you shoot with a flash.
To Next Page
Loading...
