Sony IMX035 - 6 Advanced Operation

80
6. ADVANCED OPERATION
Question 1:
How do I view the live images of the IP camera via the Microsoft Internet Explorer on the
Desktop PCs or the laptop computers in a situation where there are no monitors or
television?
◇The ways to get the IP address of an IP camera without a monitor are:
UPnP and IP function.
UPnP: Please refer to APPENDIX 1.
IP function: Please refer to APPENDIX 2.
Question 2:
How do I set up the motion detection area and its sensitivity?
◇Set up the motion detection
1. Click on the Application button in the home page.
2. Click on the Motion Detection button on the left side of the page to enter the “MOTION
DETECTION” page.
3. Click and drag the mouse left button across a targeted zone to draw a red rectangle on the
image. You can also draw the other targeted zones as you wish.
4. Please Enable the motion detection function.
5. Set up the sensitivity.
6. Adjusting the percentage allows you to set a requirement on how much of the motion window
must be filled by movement.
7. Click on the Submit button to submit the setting.
Question 3:
How do I use the DynDNS to connect the IP camera by using its Sub Hostname via the
intranet?
◇Set the DDNS function
1. Click on the Network button in the home page.