To Next PageTo Next Page
Need help?Do you have a question about the Sony KP-53V100 and is the answer not in the manual?
Procedures for leakage testing and verifying earth ground connections.
Explains LED flashes, screen display of errors, and clearing results.
Details on function operation, clearing results, and ending the screen.
Adjusting screen voltage, focus, and focus controls for optimal picture.
Adjusting deflection yoke tilt, magnets, and defocus for picture quality.
Procedures for performing color registration adjustments for Green, Red, and Blue CRTs.
Using the remote commander to access and perform electrical adjustments.
Detailed list of adjustable parameters within the service mode.
Performing registration adjustments using PJE mode and fine-tuning.
Adjusting red/blue registration and performing final checks.
Procedures for checking and adjusting HV regulation and hold-down circuits.
Verifying +B maximum voltage and OVP (Over Voltage Protection) levels.
First part of the A board schematic, including waveforms and IC information.
Schematic diagram for the G board, detailing power supply and HV circuits.
Detailed list of capacitors and screws for the A board.
List of capacitors, connectors, diodes, fuses, ICs, and coils for the G board.
Procedures for leakage testing and verifying earth ground connections.
Explains LED flashes, screen display of errors, and clearing results.
Details on function operation, clearing results, and ending the screen.
Adjusting screen voltage, focus, and focus controls for optimal picture.
Adjusting deflection yoke tilt, magnets, and defocus for picture quality.
Procedures for performing color registration adjustments for Green, Red, and Blue CRTs.
Using the remote commander to access and perform electrical adjustments.
Detailed list of adjustable parameters within the service mode.
Performing registration adjustments using PJE mode and fine-tuning.
Adjusting red/blue registration and performing final checks.
Procedures for checking and adjusting HV regulation and hold-down circuits.
Verifying +B maximum voltage and OVP (Over Voltage Protection) levels.
First part of the A board schematic, including waveforms and IC information.
Schematic diagram for the G board, detailing power supply and HV circuits.
Detailed list of capacitors and screws for the A board.
List of capacitors, connectors, diodes, fuses, ICs, and coils for the G board.
General| Brand | Sony |
|---|---|
| Model | KP-53V100 |
| Category | Projection TV |
| Language | English |
