8
3 Press TUNING +/–.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
4 Press TUNER MEMORY.
The next available preset number flashes
in the display. The stations are stored
from preset number 1.
5 Press ENTER/NEXT.
The station is stored.
6 Repeat steps 1 through 5 to store
other stations.
Normal display
Wide display
DOLBY NR
VOLUME
TUNED
ALL DISC S
AUTO
STEREO
OFF
MHz
DOLBY NR
VOLUME
TUNED
ALL DISC S
AUTO
STEREO
OFF
Wide display
MHz
DOLBY NR
VOLUME
TUNED
ALL DISC S
AUTO
STEREO
OFF
Normal display
MHz
DOLBY NR
VOLUME
TUNED
ALL DISC S
AUTO
STEREO
OFF
Step 3: Presetting
radio stations
You can preset up to 30 stations, 20 for FM
and 10 for AM.
The bands you can select depend on the kind
of tuner built into your system. Confirm the
bands by pressing TUNER/BAND
repeatedly.
1 Press TUNER/BAND repeatedly
until the desired band appears in
the display.
Each time you press this button, the
band changes as follows:
FM y AM
2 Press TUNING MODE repeatedly
until “AUTO” appears in the
display.
5124
?/1
(Power)
3
To Next Page
Loading...
Need help?
General
