Press the (Push & Play) button again.
Changing the music played in Push & Play to other music
Open the Spotify app on your smartphone, and then select the music you want.
Registering to your favorite music
While using the Spotify Connect function to playback music, press the
(Push & Play) button for about 2 seconds.
A sound indicates that registration is complete. After the
(Push & Play) indicator flashes a few times, it goes back to
being lit up white.
Hint
If the
(Push & Play) indicator flashes in red and an error alert sounds when you press the (Push & Play) button, consider
the following situations.
The Spotify Connect function has never been used
The speaker is not connected to Wi-Fi
Recheck whether the speaker is connected to Wi-Fi, as well as the settings for the Spotify Connect function.
If nothing plays back, even when you press the
(Push & Play) button, there may be a problem with the network status or with
Spotify's servers. If this is the case, briefly press the BLUETOOTH/
PAIRING button on the bottom of the speaker. Check
whether the
(Push & Play) indicator is off, and then press the (Push & Play) button again.
Related Topic
Connecting to Wi-Fi through a Wi-Fi router that has a Wi-Fi Protected Setup™ (WPS) button
Using a smartphone to connect to Wi-Fi
Using a computer to connect the speaker to Wi-Fi
Connecting to Wi-Fi to enjoy online music distribution services (Spotify)
4-748-325-11(1) Copyright 2019 Sony Corporation
To Next Page
Loading...
