Sony LT22i - Taking Photos with the Still Camera; Taking Photos Using Camera Controls

To take a photo by tapping the on-screen button
1 Activate the camera.
2 If the still camera is not selected, drag
to .
3 To display all settings, press .
4 Tap Capturing method and select On-screen button if it is not already selected.
5 Point the camera toward the subject.
6 Tap the on-screen button . The photo is taken as soon as you release your
finger.
To take a self-portrait using the front camera
1 Activate the camera.
2 If the still camera is not selected, drag
to .
3 Tap the icon on the upper left of the screen, then select Front camera.
4 To display all settings, press .
5 To take the photo, press the camera key. The photo is taken as soon as you
release your finger.
To use the zoom function
• When the camera is open, press the volume key up or down to zoom in or out.
To use the still camera flash
1 When the camera is open, press .
2 Tap Flash, and select your desired flash setting.
3 Take the photo.
To view your photos and videos
1 Open the camera, then tap a thumbnail at the bottom of the screen to open a
photo or video.
2 Flick left or right to view your photos and videos. Videos are identified by .
In step 1, you can also flick the thumbnails from right to left and then select the one you want
to view.
To delete a photo
1 Open the photo that you want to delete.
2 Tap an empty area of the screen to make appear.
3 Tap .
4 Tap Delete to confirm.
Adding the geographical position to your photos
Turn on geotagging to add the approximate geographical location (a geotag) to photos
when you take them. The geographical location is determined either by wireless
networks (mobile or Wi-Fi® networks) or GPS technology.
When appears on the camera screen, geotagging is turned on but the geographical
position has not been found. When appears, geotagging is turned on and the
geographical location is available, so your photo can get geotagged. When neither of
these two symbols appear, geotagging is turned off.
To turn on geotagging
1 Activate the camera.
2 If the still camera is not selected, drag to .
3 Press , then tap Geotagging > On.
4 Tap OK to agree to enable GPS and/or wireless networks.
5 Check the options you want to select under Location services.
6 After you confirm your settings, press to return to the camera screen.
7 If appears on the camera screen, your location is available and your photo can
get geotagged. If not, check your GPS and/or wireless network connection.
66
This is an Internet version of this publication. © Print only for private use.