Sony MDM-X4 Mk2 - Page 5

BEN
Synchronization
with
MIDI
Equipment
(Mk2)
1 Press EDIT.
EDIT] appears in the displav.
2
Turn
the
jog
dial
so
that
“Song
Tempo"
appears
in
the displav.
The name of the edit function starts blinking in
the displav.
3 Press ENTER.
The tempo map setting display appears.
jj
Tempo
Tempo change position
Tempo map number (blinking)
Note
If vou do not want to change the tempo information.
leave the tempo information numbers blank.
4 Press ENTER again.
The indication for the tempo change position
starts blinking.
Tempo map 1 can only be set to the first bar.
5S Turn the jog dial to display 0001.
The units in the displav represent bars.
If vou hold down SHIFT while turning the jog
dial you can specify the tempo change position in
16th note units within the respective bar.
01:00014120
Blinking
Note
If vou do not want to change the tempo information.
leave the tempo information numbers blank.
6 Press ENTER.
The indication for the tempo starts to blink.
7 Turn the jog dial to display 120.
01:900012120
Blinking
8 Press ENTER.
The time setting display appears.
9
Use
the
jog
dial
and
ENTER
to
display
04/04.
01:04/04
10 Press ENTER again when finished.
The tempo map number blinks.
11 Turn the jog dial to display 02.
Dei
12 Repeat steps 3-9 to create the new tempo map.
When the tempo map is complete, the settings are
displaved in order automatically starting from the
first tempo change position.
To complete construction of the tempo map
Press EXIT repeatedly until the EDIT display
disappears from the display.
Notes
* The time setting is onlv possible at the beginning of each
bar.
* You can assign up to 50 tempo maps to each song. The
tempo information can be stored on the disc, but since
there is a limited amount of memorv on each disc it mav
not be possible to store 50 tempo maps for each song if
"
there are several songs on a disc. In this case "Tempo Full”
will appear in the display when vou select the tempo map
number
* Due to the nature of the MD system, MIDI clock
intormation cannot be output and tempo information
cannot be stored when using standard music MD discs.