Go to Page Top
Go to Page Top
green or the sound may be interrupted. This is not a malfunction. In this case, turn the volume down.
The headphones are not guaranteed to operate via a USB hub or USB cable extension. Use the supplied micro-
USB cable only.
Do not disconnect the Mac while operating. Before disconnecting the Mac from the headphones, stop playback and
turn the headphones off to prevent damage to data.
Digitally broadcast sound cannot be output from a Mac’s USB port. In this case, connect the Input jack (stereo mini)
of the headphones to the analog audio output of the Mac. For details on connections, see “Connecting to an analog
output device.”
Be careful not to trip over the connecting cable.
Related Topic
Installing “Hi-Res Audio Player” on a computer
Connecting to an analog output device
Compatible operating systems (Mac)
4-547-764-11(1)
Copyright 2014 Sony Corporation
To Next Page
