Sony MDS-E12 - Page 26

26
if 2 is specified to Track From and 4 to Track To, tracks’ order changes
as follows:
1 Tr:ABC
2 Tr:GHI
3 Tr:JKL
4 Tr:DEF
5 Tr:MNO
:
:
This command must be sent in stop mode.
As track numbers after the track between Track From and Track To will
be decreased, if the command is sent other than in stop mode,
sometimes it may cause malfunction such that MDS sends out an
incorrect track number.
Example of transmission packet:
Move the 2nd track to the 4th track.
7EH, 09H, 05H, 47H, 0AH, 05H, 02H, 04H, FFH
6.28 UNDO REQ
Function: To cancel edit operation just before the current operation.
Data length: 2 bytes
Data: 0AH, 11H
before the current operation.
When this command is sent in stop mode after “ERASE”, “DIVIDE”,
“COMBINE”, “MOVE” or “NAME IN” has been carried out, MDS
restores the condition just before the edit operation.
If one of the following operation is carried out after edit operation, can-
cel will be impossible by this command:
∗ Enter recording pause mode or recording mode.
∗ Eject a disc.
∗ Turn off the power.
This command must be sent in stop mode.
If the command is sent other than in stop mode, sometimes it may
Details of function: This is the command to cancel edit which has been carried out just