EasyManua.ls Logo

Sony MDS-E12 - Front Panel Descriptions; Remote Descriptions

Sony MDS-E12
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
7EH, 07H, 05H, 47H, 0AH, 11H, FFH
6.29 MODEL REQUEST
Function: To check model information.
Data length: 2 bytes
Data: 02H, 10H
Details of function: Information about recording function of MDS can be shown by this
command.
Example of transmission packet:
Check model information.
7EH, 07H, 05H, 47H, 20H, 10H, FFH
6.30 STATUS REQ
Function: To check the condition of mecha deck.
Data length: 2 bytes
Data: 20H, 20H
cause malfunction such that MDS sends out an incorrect track num-
ber.
Example of transmission packet:
Cancel edit operation just before the current operation.
Details of function: This is the command to make MDS send out “STATUS DATA” indicat-
ing current mecha deck condition.
When this command is sent, MDS sends out “STATUS DATA”.
“STATUS DATA” contains information such as exist/no exist of disc,
the value of REPEAT MODE, the value of PLAY MODE and so on.
Example of transmission packet:
Make MDS send out “STATUS DATA”.
7EH, 07H, 05H, 47H, 20H, 20H, FFH

Other manuals for Sony MDS-E12

Related product manuals