Sony MDS-E12 - 3-5. Selecting the Test Mode; For details of each adjustment mode, refer to 4. Electrical Adjustments on page 56.; Modes with (x) in the Mark column are not used for servicing and therefore are not described in detail.

44
TrackNo: 1(00H) to 255(FFH)
PacketNo: 2(00H) to 255(FFH)
NameData: ASCII code of the character of the disc name.
0(00H), ‘ ’(20H) to ‘Z’(5AH), ‘^’(5EH) to ‘z’(7AH)
Details of function: Outputs track name recorded on disc.
MDS outputs this data when it received a “TRACK NAME REQ”
command in the stop mode.
Only maximum 16 characters are to be sent per one packet in this data.
Therefore, if 16 or more characters are recorded, MDS sends data by
dividing into some packets.
NameData is up to 16 characters and in case that the number of char-
acters is less than 16, 0(00H) fills NameData.
Example of receive packet:
The track name of the first track named “MDS-E12 minidisc recorder”.
6FH, 18H, 05H, 47H, 20H, 4AH, 01H, 4DH, 44H, 53H,2DH, 45H, 31H,
32H, D0H, C6H, C3H, DEH, A8H, BDH, B8H, DAH, BAH, FFH
6FH, 18H, 05H, 47H, 20H, 4BH, 02H, 2DH, C0H, DEH, 2DH, 00H,
00H, 00H, 00H, 00H, 00H, 00H, 00H, 00H, 00H, 00H, 00H, FFH
7.17 ALL NAME END
Function: Ends disc/track name output.
Data length: 2 bytes
Data: 20H, 4CH
Details of function: When MDS received “ALL NAME REQ” command, it outputs this data
after it sent all track names.
Example of receive packet:
Completed output of all track names responding to “ALL NAME REQ”
command.
6FH, 07H, 05H, 47H, 20H, 4CH, FFH
7.18 ELAPSED TIME
Function: Elapsed time in playback mode.
Data length: 6 bytes