Sony MDS-E12 - 3-5. Operating the Continuous Playback Mode; 1. Entering the Continuous Playback Mode; 2. Changing the Parts to Be Played Back; 3. Ending the Continuous Playback Mode

45
Data: 20H, 51H, TrackNo, 01H, Min, Sec
TrackNo: 1(01H) to 255(FFH)
Min: 0(00H) to 60(3CH)min
Sec: 0(00H) to 60(3CH)sec
Details of function: When “ELAPSED TIME” commands MDS to send elapsed time, MDS
outputs this data each time elapsed time varies in playback mode or in
FF, REW in the middle of playback mode.
Example of receive packet:
The first track playbacks 0 minute and 2 seconds.
6FH, 0BH, 05H, 47H, 20H, 51H, 01H, 01H, 00H, 02H, FFH
7.19 REC REMAIN
Function: Information about remaining time for recording.
Data length: 5 bytes
Data: 20H, 54H, 01H, Min, Sec
Min: 0(00H) to 60(3CH)min
Sec: 0(00H) to 60(3CH)sec
Details of function: MDS received a “REC REMAIN REQ” command outputs the record-
able remain time information of the current disc.
Example of receive packet:
Recordable remaining time is 74 minutes and 43 seconds.
6FH, 0AH, 05H, 47H, 20H, 54H, 01H, 4AH, 2BH, FFH
7.20 NAME REMAIN
Function: Information about the remaining name data of the disc.
Data length: 6 bytes
Data: 20H, 55H, 00H, Track, RemainH, RemainL
Track: 0(00H) to 255(FFH)
RemainH: 0(00H) to 28(1CH)
RemainL: 0(00H) to 255(FFH)
Details of function: MDS received a “NAME REMAIN DATA” command outputs inputable
name remaining data in the current disc.
This data sends out the quantity of name area + unused area reserved