Sony MDS-E12 - SECTION 4 ELECTRICAL ADJUSTMENTS; 4-1. Parts Replacement and Adjustment; Check Procedure Before Replacement

51
specified value, but MDS outputs “DIVIDE POINT DATA” responding
to the time divide planed point changed.
Example of receive packet:
Divide planed point is +1.
6FH, 07H, 05H, 47H, 20H, 8EH, 01H, FFH
7.33 UNDEFINED COMMAND
Function: Received an undefined command.
Data length: 2 bytes
Data: 40H, 01H
Details of function: Indicates that the received command is undefined.
When MDS receives an undefined command, it outputs this informa-
tion.
Example of receive packet:
Received an undefined command.
6FH, 07H, 05H, 47H, 40H, 01H, FFH
7.34 IMPOSSIBLE
Function: Impossible to execute.
Data length: 2 bytes
Data: 40H, 03H
Details of function: Indicates that received command is impossible to execute.
MDS outputs this information when the command does not fulfill the
conditions to be executed.
Example of receive packets:
Impossible to execute the command.
6FH, 07H, 05H, 47H, 40H, 03H, FFH