Sony Memory Stick User Manual

15
Performing an Auto-run Function
1 Insert the Memory Stick media set for auto-run into the
Memory Stick slot.
The Now Loading dialog box appears, and the specified application
and database files will be copied to the CLIE handheld. After the
copying is complete, the application will automatically start.
Note
Do not remove the Memory Stick media when the "Now Loading" dialog
appears.
2 Use the launched application.
3 When you finish using the application, remove the Memory
Stick media.
The application closes, and it will return to the Home screen. The
application and database files will automatically be deleted from the
memory of the CLIE handheld.
Note
• The auto-run function does not work if you insert a Memory Stick media
into your CLIE handheld during infrared data transfer or the check-in/out
operation with Audio Player while MS Gate or MS Autorun is running.
• Data in the Memory Stick media is not updated when the Memory Stick
media is removed.
• You cannot delete the data that MS Autorun copies into your CLIE
handheld if the Memory Stick media is removed during the check-in/out
operation with Audio Player while the PictureGear Pocket application is
running.
In this case, go to the Tools menu in MS Autorun and tap Recover. Sony
recommends that you go to the Home screen before removing the Memory
Stick media.

Sony Memory Stick Specifications

General

Form Factor	Proprietary
Type	Flash memory card
Introduced	1998
Interface	Serial
Weight	4 g
Operating Temperature	0°C to +60°C