•
20
iPod
For details on the compatibility
of
your iPod, see
"About iPod" on page 28 or visit the support site.
In
these Operating Instructions. "iPod"
is
used as
a general reference for the iPod functions on the
iPod and iPhone, unless otherwise specified by
the text or illustrations.
Support site
http://esupport.sony.com
http://www.xplodsony.com/
.
Playing
back
iPod
Before connecting the iPod, turn down the
volume
of
the unit.
1 Connect the iPod to the USB
connector via the dock connector to
USB cable.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below.*
Tip
We
recommend the RC-tOOIP USB cable (not
supplied)
to
connect the dock connector.
The tracks on the iPod start playing
automatically from the point last played.
If
an iPod
is
already connected, to start
playback press
(SOURCE/OFF)
repeatedly
until "USB" appears. ("IPD" appears
in
the
display when iPod
is
recognized.)
*
In
the case
of
an iPod touch
or
iPhone being
connected,
or
that the iPod was last played back
using passengercontrol, the logo will not appear on
the screen.
2 Press
(MODE)
to select the play mode.
The mode changes as follows:
RESUMING
--.
ALBUM
--.
TRACK
--.
PODCAST*
--.
GENRE
--.
PLAYLIST
--.
ARTIST
* May not appear depending
on
iPod setting.
3 Adjust the volume.
Press
(SOURCE/OFF)
for I second to stop
playback.
Removing the iPod
1 Stop the iPod playback.
2 Remove the iPod.
Caution for iPhone
When you connect an iPhone
via
USB, telephone
volume
is controlled
by
iPhone itself.
In
order
to
avoid
sudden loud sound after a call,
do
not increase the
volume on the unit during a telephone call.
Notes
• Do not detach the front panel during playback
of
the
iPod, otherwise data
may
be damaged.
• This unit cannot recognize iPod
via
a USB hub.
Tips
• When the ignition key is turned
to
the ACC position,
and
the unit
is
on,
the iPod will be recharged.
•
If
the iPod is disconnected during playback, "NO
DEV" appears in the display
of
the unit.
Resuming mode
When the iPod is connected
to
the dock
connector, the mode
of
this unit changes to
resuming mode and playback starts in the mode
set by the iPod.
In resuming mode, the following buttons do not
function.
-
G)
(REP)
-m (SHUF)
Display items
o Source (iPod) indication
o Track name, Artist name, Album name, Track
number/Elapsed playing time, Clock
To
change display items
0,
press
(DSPL).
Tip
When album/podcastlgenre/artistlplaylist is changed,
its item number appears momentarily
Note
Some letters stored
in
iPod may not
be
displayed
correctly
To Next Page
Loading...
Need help?
General
