Sony MHC-501 - Page 5

AM loop aerial (supplied).
FM lead aerial
(supplied)
To improve the AM reception
After you connect the AM aerial, connect a
6- to 15-meter insulated wire to the AM
terminal. Connect the *# terminal to earth.
Important
Ground the external aerial from 7; terminal
against lightning with the screw clamp. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
Screw clamp
FM75Q
COAXIAL
Insulated wires
(not supplied)
Ground wire
IDo this connection last!
| STEP 3 | Connecting the
Power
Connect the mains lead to a wall outlet
after you have made all the above
connections.
to a wall outlet
Caution
Before you power on the stereo, turn the
VOLUME control counterclockwise to
decrease the sound level.
Left speaker
to a wall outlet
Chapter 1: Setting up