28
1 Select the audio emphasis you want
for your basic sound (see “Selecting
the audio emphasis” on page 26).
2 Press GEQ.
3 Press B or b to select frequency,
press V or v for the desired
frequency band to adjust level.
4 Press ENTER.
Adjusting the graphic
equalizer
You can adjust the sound by raising or lowering
the levels of specific frequency ranges.
Before operation, first select the audio
emphasis you want for your basic sound.
3
3
2
Note
If you choose another menu of audio emphasis
(other than “EFFECT OFF”), the adjusted sound
effect is lost. To retain the adjusted sound effect for
future use, store it in a personal file. (See “Making a
personal audio emphasis file” on page 29.)
1
DISCS
ALL
)0P
+=p
·
·ª
·ª
·
p
V
v
b
B
4
To Next Page
Loading...
