EasyManua.ls Logo

Sony MHC-RV2 - Tape Recording Methods; CD Synchro Recording; Manual Recording Procedures

Sony MHC-RV2
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tape
23
GB
To stop recording
Press x.
Tip
For recording from the radio:
If noise is heard while recording from the radio, move
the respective antenna to reduce the noise.
4 Press CD SYNC. Press REC PAUSE/START.
Deck B stands by for recording.
REC flashes.
2 Press CD.
Press CD, TAPE A/B or TUNER/BAND.
1 Load a recordable tape into deck B.
Note
You cannot listen to other sources while recording.
5 Press REC PAUSE/START.
Recording starts.
Press REC PAUSE/START, and then start
playing the desired source to record.
Recording from a disc/tape/radio
manually
Recording to a tape
CD Synchro Recording/Recording Manually
You can record from a disc, tape (or connected components) or radio. You can use TYPE I (normal)
tapes. The recording level is adjusted automatically.
Steps Recording from a disc
(CD Synchro Recording)
Load the disc or tape (or other audio
source), or tune in the station you want
to record.
3 Load the disc you want to record.

Table of Contents

Related product manuals