Sony MHC-RV2 - CD;VIDEO CD;MP3 File Operations; Setting the System Clock; Loading Discs into the Player

CD/VIDEO CD/MP3 file
9
GB
Setting the clock
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
3 Press . or > on the remote
repeatedly to set the hour.
4 Press ENTER on the remote.
5 Press . or > on the remote
repeatedly to set the minute.
6 Press ENTER on the remote.
The clock starts working.
To adjust the clock
1 Press CLOCK/TIMER SET on the remote.
2 Press . or > on the remote to select
“CLOCK SET”, then press ENTER on the
remote.
3 Do the same procedures as step 3 to 6
above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
To insert additional discs, press DISC
SKIP/EX-CHANGE to rotate the disc tray.
3 Press Z OPEN/CLOSE to close the disc
tray.
CD/VIDEO CD/MP3 file
Loading a disc
You can also load and play discs with MP3
files. See “Playing a disc with MP3 files” on
page 15 for MP3 files.
1 Press Z OPEN/CLOSE.
The disc tray opens.
2 Place a disc with the label side up on
the disc tray.