Getting Started
7
GB
5 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
6 Set the color system to PAL or NTSC
depending on the color system of your
TV while the power is off.
AM loop antenna
Extend the FM lead antenna
horizontally
Jack type B
AM
FM75
COAXIAL
3 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cable.
VIDEO OUT
When using a TV
Turn on the TV and select the video input so
that you can view the pictures from this system.
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
120V*220V230 - 240V
* Saudi Arabian model: 120 – 127 V
The color system
of your TV
Press
AUTO
(factory setting)
?/1 while holding down X.
If your TV automatically
changes the color system
according to the input signal,
the system is set to AUTO.
NTSC ?/1 while holding down
>. The system is set to
NTSC.
PAL ?/1 while holding down
.. The system is set to
PAL.
Notes
• You cannot set the color system in the Power
Saving Mode.
• When you play back a VIDEO CD recorded in the
different color system from the one you set to the
unit, the picture image may be distorted.
To connect optional components
See page 33.
continued
To Next Page
Loading...
Need help?
General
