Sony MHC-RV7 - Tape Deck Operations; Loading a Tape into the Deck; Playing Tapes

18
GB
MHC-RV7 4-240-085-11 (1)
Loading a tape
1 Press TAPE A/B repeatedly to select
Deck A or B.
2 Press Z on the selected deck.
3 Insert a tape in deck A or B.
Playing a tape
1 Load a tape.
2 Press DIRECTION repeatedly to select
g to play one side, j to play both
sides or RELAY* (Relay Play) to play
both decks in succession.
3 Press hH. The tape starts playing.
Press hH again to play the reverse side.
* Relay Play always follow this cyclic sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
Tape
Tape presence indicator
Insert with the
side you want to
play/record facing
forward.
To
Stop playback
Pause playback
Fast-forward
Rewind
Tips
• During j or Relay Play, the deck stops
automatically after repeating the sequence five
times.
• Pressing TAPE A/B while the power is off
automatically turns the power on and TAPE is
selected as the function (except for Power Saving
Mode).
• When a tape (tapes) is (are) inserted, corresponding
presence indicators light up.
Searching for the beginning of a
track (AMS*)
During playback, press . or > repeatedly
for the number of songs you want to skip
forward (or backward).
The search direction, + (forward) or
– (backward), and number of songs being
skipped (1~9) appear in the display.
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the unit is placed near a television.
Example: searching forward 2 songs
ALL1 DISCS
Do this
Press x.
Press X.
Press again to resume
playback.
Press M while playing the
front side, or press m while
playing the reverse side.
Press m while playing the
front side, or press M while
playing the reverse side.