Sony MHC-V41D - System Display and Setup Options; Changing the Display Mode; Quitting Quick Setup

24
GB
MHC-V41D.GB.4-729-484-13(1)
To change the setting manually
See “Using the Setup Menu”
(page32).
To quit the quick setup
Hold down SHIFT and press SETUP.
Note
The guide message appears when you
turn on the system for the first time or
after performing [RESET] (see “Returning
the setup menu settings to the default”)
(page 76).
Changing the display
mode
Press DISPLAY repeatedly while
the system is turned off.
Each time you press the button, the
display mode changes as follows.
Demonstration
The messages about the main
features of this system scrolls across
the display and the illumination
turns on.
To turn off the illumination, press
PARTY LIGHT.
No display (Power Saving mode)
The display is turned off to conserve
power.