Help Guide
Home Audio System
MHC-V42D
Playback does not start.
Insert a disc with the labeled side up.
Wipe the disc clean.
Reload the disc.
Load the disc that this system can play back.
Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours
until the moisture evaporates.
The DVD VIDEO with unsupported region code was loaded.
Turn off the system and reconnect the USB device, then turn on the system.
Check the information on the website about compatible USB devices.
Related Topic
Turning the power on
Turning the power off (Standby mode)
Connecting with a USB device
4-748-035-41(1) Copyright 2019 Sony Corporation