Listening to TV sound via the system

Mendengar bunyi TV melalui sistem

Select one of the connections below according to the jacks/connector on your TV.

Pilih satu daripada sambungan di bawah mengikut bicu/penyambung pada TV anda.

MHC-V42D

Printed in China

Note

To listen to TV sound, do the following:

– Press FUNCTION repeatedly to select “TV”.

– Set the speakers setting of the TV (BRAVIA) to Audio System. Refer to

the operating instructions of your TV on how to set the TV.

If “CODE 01” and “SGNL ERR” appear on the display of the unit

When the audio input signals to the system are other than 2-channel

Linear PCM signals, the messages “CODE 01” and “SGNL ERR”

(indicate that the input audio signals are unsupported) appear on

the display of the unit.

In this case, select the proper audio output mode on the TV in order

to output 2-channel Linear PCM audio signals. For details, refer to the

operating instructions of your TV.

Catatan

Untuk mendengar bunyi TV, sila lakukan perkara berikut:

– Tekan FUNCTION berulang kali untuk memilih “TV”.

– Tetapkan pembesar suara TV (BRAVIA) kepada Sistem Audio. Rujuk

arahan pengendalian TV anda tentang cara menetapkan TV.

Jika “CODE 01” dan “SGNL ERR” muncul pada paparan unit

Apabila isyarat input audio ke sistem adalah selain isyarat PCM

Linear 2 saluran, mesej “CODE 01” dan “SGNL ERR” (menunjukkan

isyarat audio input tidak disokong) muncul pada paparan unit.

Dalam hal ini, pilih mod output audio yang betul pada TV untuk

mengeluarkan isyarat audio PCM Linear 2 saluran. Untuk butiran, sila

rujuk arahan pengendalian TV anda.

TV without HDMI IN (ARC) connector

TV tanpa penyambung HDMI IN (ARC)

Audio cable (not supplied)

Kabel audio (tidak dibekalkan)

TV with HDMI IN (ARC) connector

TV dengan penyambung HDMI IN (ARC)

High Speed HDMI Cable with

Ethernet (not supplied)

High Speed HDMI Cable with

Ethernet (tidak dibekalkan)

5-000-868-21(1)

Note on Party Light

The Party Light will turn on when you turn on the system. Do

not look directly at the light-emitting parts.

To turn off the Party Light, press PARTY LIGHT repeatedly to

select “LED OFF”.

Perhatian terhadap Lampu Parti

Lampu Parti akan dihidupkan apabila anda menghidupkan

sistem. Jangan lihat secara langsung pada bahagian yang

memancarkan cahaya.

Untuk mematikan Lampu Parti, tekan PARTY LIGHT berulang

kali untuk memilih “LED OFF”.

Sony MHC-V42D

Table of Contents

Other manuals for Sony MHC-V42D

Related product manuals