Help Guide
Home Audio System
MHC-V42D
Listening to music of a device via BLUETOOTH connection
You can enjoy listening to music of a BLUETOOTH device and operate it by the system via BLUETOOTH connection if it
supports the following BLUETOOTH profiles.
A2DP (Advanced Audio Distribution Profile)
Enables you to enjoy high-quality audio contents wirelessly.
AVRCP (Audio Video Remote Control Profile)
Enables you to adjust the volume and operate to play, pause or skip to the beginning of the next/current track.
Operations may vary depending on the BLUETOOTH device. Refer also to the operating instructions supplied with the
BLUETOOTH device.
Note
Make sure beforehand that the volume on the BLUETOOTH device and system are set to a moderate level to avoid sudden loud
sound output from the system.
Depending on the BLUETOOTH device, adjusting the volume of the system may not be possible on the BLUETOOTH device
while playback on the device is stopped/paused.
Note
If the communication condition is poor, the BLUETOOTH device may react incorrectly to the operations on the system.
Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the
connected device.
Noise or sound interruption may occur depending on the BLUETOOTH device connected with the system, the communication
environment or the usage environment.
Related Topic
Pairing and connecting with BLUETOOTH devices
Terminating the BLUETOOTH connection (After use)
4-748-035-41(1) Copyright 2019 Sony Corporation
Connect the system with the BLUETOOTH device.
The BLUETOOTH device name appears on the display when the BLUETOOTH connection is established.
1
Start playback on the BLUETOOTH device.
2
Adjust the volume by pressing VOLUME -/+ button on the system or operating the BLUETOOTH device.
3
To Next Page
Loading...
Need help?
General
Weight and Dimensions
