Sony MHC-V42D Help Guide

Help Guide
Home Audio System
MHC-V42D
Turning on or off the BLUETOOTH signal
You can connect to the system from a paired BLUETOOTH device when the system’s BLUETOOTH signal is set to on.
At the time of purchase, this setting is set to on.
Note
You cannot perform the following operations when BLUETOOTH signal is set to off:
Pair and/or connect with BLUETOOTH device.
Use “Sony | Music Center.”
Change the BLUETOOTH audio codecs.
If you touch the N-Mark on the system with an NFC-compatible BLUETOOTH device or set the BLUETOOTH standby mode to
on, the BLUETOOTH signal will be set to on automatically.
4-748-035-41(1) Copyright 2019 Sony Corporation
Hold down
(folder) + and MEGA BASS on the system for about 3 seconds.
[BT ON] or [BT OFF] appears on the display.
1
57

Sony MHC-V42D Specifications

General

Speaker type	-
Speaker placement	Floor
Built-in amplifier	Yes
Number of woofer drivers	1
Number of tweeter drivers	2
Type	Home audio mini system
Control type	Buttons, Rotary
Cassette deck	No
Product color	Black
Disc loading type	Tray
Number of optical discs	1 discs
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack	1 pc(s)
RMS rated power	- W
Woofer diameter	250 mm
Tweeter diameter	40 mm
Mid-range driver diameter	80 mm
Coloration	Monochromatic
Bluetooth profiles	A2DP, AVRCP, SPP
Illumination location	Front
Volume control	Digital
Power source	Battery
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Preset stations quantity	20
Recording on	USB
Playback modes	Normal, Repeat, Shuffle
Playback disc formats	CD audio, DVD-Audio, VCD
Audio formats supported	AAC, MP3, WAV, WMA
Video formats supported	MPEG1, MPEG4, XVID

Weight and Dimensions

Depth	300 mm
Width	328 mm
Height	799 mm
Weight	12600 g