Help Guide
Home Audio System
MHC-V42D
Connecting multiple audio systems (Wired Party Chain function)
You can connect multiple audio systems in a chain to create a more exciting party environment and produce higher
sound output.
One activated system in the chain serves as the “Party Host” and shares music.
Other systems become “Party Guests” and play the same music as that being played by the “Party Host.”
Setting up the Party Chain
Set up a Wired Party Chain by connecting all the systems using audio cords (not supplied).
Before connecting the cords, be sure to turn off the systems.
If all the systems are equipped with the Wired Party Chain function
Example: When connecting with this system as the first system
A: First system (Party Host)
B: Second system (Party Guest)
C: Last system (Party Guest)
D: Continue the connection until the last system.
The last system must be connected to the first system. If the last system is not connected back to the first system,
the Party Host cannot be changed.
Any system can become a Party Host. You can change the Party Host to another system in the chain. For details,
see Enjoying music playback with multiple audio systems (Wired Party Chain function).
Make sure that a function other than the AUDIO IN function is selected. When the AUDIO IN function is selected, this
feature cannot be used.
If one of the systems is not equipped with the Wired Party Chain function
Example: When connecting with this system as the first system
To Next Page
Loading...
Need help?
General
Weight and Dimensions
