10
GB
You can play all the tracks or a single track on a
disc repeatedly.
Use buttons on the CD player for the operation.
Using the display window
Press REPEAT/FM MODE during playback
until “REP” or “REP1” appears.
REP: For all the tracks on the disc up to five
times.
REP1: For a single track only.
To cancel Repeat Play
Press REPEAT/FM MODE repeatedly until
both “REP” and “REP1” disappear.
Note
When you select “REP1”, that track is repeated
endlessly until “REP1” is canceled.
You can make a program of up to 25 tracks in the
order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 17).
Using the display window
1 Press CD.
2 Press PLAY MODE/DIRECTION on the
CD player in stop mode repeatedly until
“PGM” appears.
3 Press . or > repeatedly until the
desired track number appears.
When programming an MP3, press
ALBUM – or + to select album, then press
. or > repeatedly until the desired
track number appears.
4 Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
5 To program additional tracks, repeat
steps 3 and 4.
6 Press nN.
Program Play starts.
Playing repeatedly
— Repeat Play
Creating your own
program
— Program Play
Selected track number
Total playing time (including selected track)
To Next Page
Loading...
