16
GB
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press TAPE A/B.
3 Press PLAY MODE/DIRECTION on the
CD player repeatedly to select “g” to
play one side. Select “j” to play both
sides. Select “RELAY” (Relay Play)
*
to
play both decks in succession.
4 Press nN.
The tape starts playing.
* Relay play always follow this cyclic
sequence:
Deck A (front side) t Deck A (reverse
side) t Deck B (front side) t Deck B
(reverse side)
Other operations
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under the
following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Tip
If you select “j” or “RELAY”, the deck stops
automatically after repeating the sequence five times.
Playing a tape
Playing direction
To Do this
Play the reverse
side
Press nN again during play.
Stop play Press x.
Pause Press X. Press again to resume
play.
Fast-forward or
rewind
Press m or M in stop mode.
Search for the
beginning of the
next track (AMS)*
Press > during play.
Each time you press the button,
the search direction, + (forward),
and number of tracks being
skipped (1 to 9) appear.
Search for the
beginning of the
current track or
previous track
(AMS)*
Press . during play.
Each time you press the button,
the search direction, – (back), and
number of tracks being skipped
(1 to 9) appear.
Remove a tape Press A Z or Z B on the tape
deck.
To Next Page
Loading...
