100
Time offset execution
If the [AUTO TRANS] buttons for the transition and
independent key transition are pressed with a time offset,
the following result occurs.
The common transition type is a wipe and the independent
key transition type is a mix.
Time offset execution with the key inserted: With the
key inserted (on), the key is removed (off) using each
transition type with a time offset.
Whichever button is pressed first, when the common
transition completes, even if the independent key
transition is still not completed, the transitions end
simultaneously.
Time offset execution with the key not inserted: With
the key not inserted (off), the key is inserted (on) using
the transition type whose [AUTO TRANS] button is
pressed first.
Since the key is then in the inserted state, the transition
whose [AUTO TRANS] button is pressed later will
remove (off) the key. When all keys are completely
removed, all transitions are completed.
Wipe and mix
progress
simultaneously.
The transitions
continue until both
are completed.
The key is removed,
even if the
independent key
transition has not
completed.
Example: When the independent key transition [AUTO
TRANS] button is pressed later
Transition (wipe)
Independent key
transition (mix)
To Next Page
Loading...
