To
Find the beginning of
the current track or a
previous track’)
Find the beginning of
the next track*)
Go backwards while
playing
Go forward while
Operation on the recorder
Operation on the remote
control
Press I++.
Press I44 repeatedly until the
beginning of the desired track.
Press )H once.
Flip the lever towards I44 .
Flip the lever towards I44
repeatedly until the beginning of
the desired track.
Flip the lever towards W/W.
Press and hold W4.
Flip and hold the lever towards
HI.
Press and hold W.
Flip and hold the lever towards
w/m.
Press II.
Press II.
Press II again to resume play.
Press II again to resume play.
Press
n
, and open the lid.-?)
Press
n
, and open the lid.
I)lf you press I44 twice continuously
while playing the first track of the disc, the recorder goes to the
beginning of the last track on the disc.
2) If you press H during the last track of the disc, the recorder goes to the beginning of the first track
on the disc.
3) Once you open the lid, the point to start play will change to the beginning of the first track.
lf the play does not start
Make sure the recorder is not locked (page 58).
Suppressing the skips of the sound
(G-PROTECTION)
The G-PROTECTION function was developed
to provide a higher level of shock resistance
than that of existing players.
Note
The playback sound may skip if:
l
the recorder receives stronger continuous
shock.
l
a dirty or scratched MiniDisc is played.
.“‘.
c
l
The playback mode will switch automatically
(stereo, LP2 stereo, LP4 stereo, or monaural).
l
To play only the tracks in a certain group, see
“Using the group function (Group Mode)”
(page 36).
25-68
To Next Page
Loading...
