Sony MZ-NH600 - Op Service Assy; DC Motor SSM18 D;C-NP (Spindle) (M701), DC Motor (Sled) (M702), DC Motor Unit (over Write Head Up;Down) (M703)

MZ-NH600
10
3-8. OP SERVICE ASSY
3-9. DC MOTOR SSM18D/C-NP (SPINDLE) (M701), DC MOTOR (SLED) (M702),
DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)
3 Remove lead screw block assy.
4 OP service assy
2 rack spring
1 screw (M1.4)
3 two screws (M1.4)
4 DC motor (sled)
(M702)
1 Remove four solders of flexible board.
2 Remove two solders of flexible board.
6 three self tap screws
7 DC motor SSM18D/C-NP
(spindle) (M701)
5 motor base assy
9 DC motor unit
(over write head up/down)
(M703)
8 self tap screw