What does Exchg batt! mean on Sony Camcorder?
If your Sony Camcorder displays 'Exchg batt!', it means the battery of the internal clock is exhausted. Contact your Sony service or sales representative.
How to resolve Sony Camcorder ILL. SETUP! error?
If your Sony Camcorder displays 'ILL. SETUP!', reset the settings in the setup menu.
What to do if Sony Camcorder displays Input Sig!?
If your Sony Camcorder displays 'Input Sig!', it appears when the signal that does not correspond to the system frequency or the number of lines set in this unit is being input, or when HD-SDI is selected as a video input signal while setting the SD signal recording. Input a signal that matches the system frequency, or change this unit’s system frequency setting.
How to fix Sony Camcorder media full?
If your Sony Camcorder displays 'Media Full!', it means you need to delete unneeded clips to free up space.
What to do if Sony Camcorder shows Over DUR!(USB DRV)?
If your Sony Camcorder displays 'Over DUR!(USB DRV)', it means the total length of the clips stored in the operation target folder in the external storage exceeds 24 hours. This operation target folder cannot be used.
Why Sony Camcorder shows REC STOP WITHIN 2MIN?
If your Sony Camcorder displays 'REC STOP WITHIN 2MIN', it means the length of the clip has reached the maximum limit during recording. Recording will stop within the next two minutes.
How to fix Sony Camcorder Unknown FS!(A/B)?
If your Sony Camcorder displays 'Unknown FS!(A/B)', it means the inserted memory card is formatted with an unsupported file system, or it is not formatted. Format the memory card, or exchange the memory card for one that is formatted with a file system supported by this unit.
What to do if Sony Camcorder displays Repair Failed (A/B)?
If your Sony Camcorder displays 'Repair Failed (A/B)', it means the memory card is damaged, and recording and playback are not possible. Replace the memory card.
What to do if Sony Camcorder displays USB DRV Error!?
If your Sony Camcorder displays 'USB DRV Error!', it means the operation target folder in the external storage needs data restoration. Perform data restoration on the device that was used to record to the external storage in question.
What to do if Sony Camcorder displays USB DRV needs Restoring.?
If your Sony Camcorder displays 'USB DRV needs Restoring', it means an abnormality has occurred on the operation target folder in the external storage, and data restoration is needed. Perform data restoration on the external.
General| Display | LCD |
|---|---|
| Internal | No |
| Product color | Black |
| Compatible memory cards | SxS |
| Video compression formats | MPEG, MPEG4 |
| AC input voltage | 100 - 240 V |
| Power consumption (typical) | 75 W |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 20 - 90 % |
| BNC input ports | 4 |
| BNC output ports | 7 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| Ethernet LAN | Yes |
| Ethernet interface type | Gigabit Ethernet |
Weight and Dimensions| Depth | 418 mm |
|---|---|
| Width | 210 mm |
| Height | 132 mm |
| Weight | 5200 g |
To Next Page
