Sony PS-X7 - SECTION 2 DISASSEMBLY AND REPLACEMENT; 2-1. REMOVAL

| PS-X6/X7
SECTION 2
DISASSEMBLY AND REPLACEMENT
2-1. REMOVAL Remove the parts in the numerical order.
Power Supply/PLL Circuit Board Removal
Cover (top) Removal
t @ ubber mat
@ turntable
TA, B3x10
OTA, 83x10 @ Power supply /PLL circuit board.
Bottom Cover Removal
insulator
Motor Removal
@ PSW3x 14
@ bottom cover
TA, B3x10
@ TA, 83x10
@ insulator
@ Unsolder nine lead-wires of the motor from
the servo amp/system control circuit board
and remove the motor.
(Refer to the mounting diagram on page 23.)