Sony PVM-2030 - Page 5

[9]
MUTING indicator
Illuminates while the sound is muted.
•
Muting is
controiied oniy
by a remote
commander.
HI
STAND BY
indicator
Illuminates when the POWER switch is
turned off.
M
POWER
switch
Press this
switch
to
turn the monitor
on.
Press this switch again to turn it off.
•
When
the monitor is turned on, the settings
of the
monitor are the same as
when
it was iast
turned off.
•
For
a
few
seconds after turning on
the monitor
the color
of picture may vary because the white
baiance is
adjusted at
this time. This is not
a problem.
Ql]
REMOTE
control detector
The beam from the Remote Ck^mmander
is received
here.
[1
CONTROL key
Press this key to
iiluminate the
keys and
indicators
on the
front panei.
Press this key
again
to
extinguish
them.
[14]
VOLUME
control
keys
Press
the
+
key to raise the voiume
or the
-
key to iower
it.
[H]
PICTURE control keys
Press
the
+
key
to
make the
contrast, color
intensity and
brightness stronger
or the
-
key
to
make
them
weaker.
d
LINE
A
indicator
[H]
LINE B
indicator
d
VTR
indicator
d
CMPTR
(computer) indicator
When
the input
source is selected, each
indicator
•
Blinks
if the indicators
and keys
excepting input source
indicators
illuminate.
•
Illuminates
if they are extinguished.
Note
on the
superimposing function
The
PVM-203(y2530
can
superimpose the
CMPTR input
source
onto the
other input source. For this function once
the
CMPTR input
source has
been
selected, both the
indicator of the
CMPTR input source and the indicator of the
input
source selected just
before the CMPTR
will blink or
illuminate.
Key
illumination
For the keys
Q]
through
[U , d
and
d
:
•
While
each key is
pressed,
it blinks,
indicating
that
adjustment
is going on.
•
During
adjustment, if the
adjustment
value reaches the
limit,
the blinking
speed becomes slower.