19
GB
Try using various functions
Rotating
1 Press MENU, B/b to select the (Editing) tab,
v/V to select [Rotate], and then press ENTER.
2 Press v/V to select the angle of rotation and press
ENTER.
You select an angle of rotation from 90 degrees, 180 degrees or
270 degrees in clockwise direction.
Using the remote control (DPF-A710 only)
You can also rotate an image with (ROTATE) on the remote
control. The image rotates 90 degrees counterclockwise every time
you press the button.
Changing the settings of the auto
power on/off function
1 Press MENU, B/b to select the (Settings) tab.
2 Press v/V to select [Auto Power ON/OFF], and press
ENTER.
P Note
An enlarged image cannot be
rotated.
zTip
When displaying the images in the
internal memory, the information
used to rotate the image is retained
even after the power is turned off.
z Tips
x During operation
The power is turned off
automatically at the time you set for
[Power-OFF timer].
x During the standby mode
The power is turned on
automatically at the time you set for
[Power-ON timer].
Continued
To Next Page
Loading...
Need help?
General
