HT-CT380/CT381
6
BOND FIXATION OF ELECTRIC PARTS
When complete POWER board or the following parts are replaced, it is necessary to fi x the parts by using the bond (SC608Z2) (Refer to
the fi gure below).
• POWER board:
C902 or C906, C903 or C908, C904 or C905, C907 or C988, C914 or C915, C967, C970, C976, C978, C980, C990, D901, LF901,
R914, R944, TH901, VDR901
(C978, C980: Except US and Canadian models only)
– POWER Board (Component Side) –
C914/915
C902/906
C903/908
C907/988
D901
TH901
LF901
C904/905
VDR901
R914
R944
C967
C970
C990
C976
C980
C978
(Except US and Canadian models only)
Ver. 1.1
To Next Page
Loading...
