1
SERVICE MANUAL
US Model
Canadian Model
AEP Model
UK Model
E Model
SA-WM250
ACTIVE SUBWOOFER
Ver 1.0 2004.03
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
9-877-696-01
2004C04-1
© 2004.03
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, from 28 – 200 Hz; rated 100 watts,
minimum RMS power, with no more than 0.8 % total
harmonic distortion from 250 milliwatts to rated
output.
System
Type Active Subwoofer (magnetically shielded design)
Speaker unit Woofer: 20 cm dia. (8 in.), cone type
RMS output 100 W (6 Ohms, 40 Hz, 10% THD)
Frequency range 28 Hz – 200 Hz
High frequency cut-off frequency
50 Hz – 200 Hz
Phase selector NORMAL, REVERSE
SPECIFICATIONS
Inputs
Input jacks INPUT: input pin jack
SPEAKER IN: input terminals
Output jacks SPEAKER OUT: output terminals
General
Power requirements Taiwan models: 110 V AC, 50 Hz
USA and Canada models: 120 V AC, 60 Hz
Other models: 230 V AC, 50/60 Hz
Power consumption 100 W
Dimensions Approx. 290 × 355 × 387 mm
(11 3/8 × 14 × 15 1/4 in.) (w/h/d)
Mass 11.5 kg (25 lb 6 oz)
Supplied accessories Foot pads (4)
Audio connecting cord (1 phono – 1 phono),
2 m (6 ft 6 1/2 in.) (1)
Speaker cords, 2.5 m (8 ft 2 1/2 in.) (2)
Design and specifications are subject to change without notice.
To Next Page
Need help?
General
