Sony SCD-1 - Super Audio Cd Player User Manual

SIDE VIEW
SCD-1
DESCRIPTION:
DIMENSIONS
(WHD):
WEIGHT:
POWER
REQUIREMENTS:
POWER
CONSUMPTION:
BACK VIEW
Super Audio
CD Player
17" X 5 1/2" X 17 3/8"
120
V
AC
36
Watts
Features and specifications subject to change without notice. • Non-metric weights and measurements are approximate.
58 lbs 7 oz
NOTE:
WHERE THERE ARE CLOSE TOLERANCES INVOLVED IN CABINET BUILDING
OR APPLICATIONS WHICH REQUIRE A GREAT DEGREE OF PRECISION WE
RECOMMEND THAT THE PRODUCT ITSELF BE USED TO MAKE THE ACTUAL
MEASUREMENTS. SONY WILL NOT BE RESPONSIBLE FOR INACCURACIES
IN THE DESIGN OR MANUFACTURE OF ENCLOSURES.
FRONT VIEW
5 3/8 "
2 "
2 " 12"
4 5/8"
1/2 "1/2 "
17"
1 "
2 " 2 "
1 "
16 5/8"
17 3/8"
3/4 "
R
RM-DS1 REMOTE CONTROL
10 5/8 "
LINE OUT (ANALOG)
BALANCED
OUT
COMMAND
MODE
ON
OFF
CD1
CD2
STANDARD
CUSTOM
TA-E/N1
DIGITAL OUT
CD
COAXIAL
OPTICAL
AC IN
8 3/8"6 1/2"
2 "
10 1/4 "
Consumer Integrated Systems • Park Ridge, New Jersey 07656 • FAX (201) 986 3062 • b2b.sel.sony.com
BALANCED
UNBALANCED
LR
LR

Sony SCD-1 - Super Audio Cd Player Specifications

General

Disc Formats	SACD, CD
Weight	26 kg
Frequency Response	2 Hz - 20 kHz (CD)
Dynamic Range	105 dB (SACD)
Total Harmonic Distortion	0.0015% (SACD)
Signal-to-Noise Ratio	110 dB (SACD)
Output Level	2.0V RMS (1kHz, 0dB)
Digital Outputs	Coaxial, Optical
Analog Outputs	RCA, XLR
Channel Separation	SACD: 105 dB CD: 105 dB

Summary

Front View Dimensions

Unit Width

Specifies the total width of the SCD-1 Super Audio CD Player as 17 inches.

Unit Height (Front)

Indicates the height of the front face of the SCD-1 unit is 4 5/8 inches.

Foot Dimensions

Details the dimensions of the unit's feet: 1/2 inch height and 2 inches width.

Side View Dimensions

Unit Depth

Provides the depth measurements of the SCD-1 unit: 17 3/8 inches and 16 5/8 inches.

Unit Height (Side)

Shows the height measurement from the side view, 5 3/8 inches.

Base Spacing

Indicates spacing between the feet on the side view: 10 5/8 inches and 10 1/4 inches.

Back View Connections

Analog Line Outputs

Details the balanced and unbalanced analog line output connectors.

Control Ports

Shows ON/OFF switch and CD1/CD2 control ports.

Digital Outputs

Identifies coaxial and optical digital output connectors.

Power Input

Indicates the AC IN power connector.