SERVICE MANUAL
SPECIFICATIONS
SDM-P232W
TFT LCD Color Computer Display
US Model
Canadian Model
AEP Model
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 23.0 inch
Input signal format RGB operating frequency*
Horizontal:
28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:
48–85 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1920 dots
Vertical: Max.1200 lines
Input signal levels Analog RGB video signal:
0.7 Vp-p, 75 Ω, positive
SYNC signal:
TTL level, 2.2 kΩ
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75 Ω, negative
(Sync on green)
Digital RGB (DVI) signal:
TMDS (Single link)
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Power consumption
Max. 80 W
Operating temperature 5–35 °C
Dimensions (width/height/depth)
Display (upright):
Approx. 566 446 × 251 mm
(22
3
/8 17
5
/8 10 inches)
(with stand)
Approx. 566 380 114 mm
(22
3
/8 15 4
1
/2 inches)
(without stand)
Mass Approx. 12.7 kg (27 lb 16 oz)
(with stand)
Approx. 10.2 kg (22 lb 8 oz)
(without stand)
Plug & Play DDC2B
* Recommended horizontal and vertical timing condition
•
•
•
Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
Horizontal blanking width should be more than 2.5 µsec.
Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
×
××
××
×
×
To Next Page
Need help?
General
