Sony SHAKE-66D - Changing the color system; Setting the clock; Changing the display

21
GB
Getting Started
Changing the color
system
(Except for Russian model)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
The default setting for color system is
different depending on the area.
Each time you perform the procedure
below, the color system changes as
follows:
NTSC y PAL
Use the buttons on the unit to perform this
operation.
1 Press "/1 to turn on the system.
2 Press DVD/CD.
3 Hold down PAN and DVD/CD for
more than 3 seconds.
“COLOR NTSC” or “COLOR PAL”
appears in the display panel.
Setting the clock
You cannot set the clock in Power Saving
Mode.
1 Press "/1 to turn on the system.
2 Hold down SHIFT, then press
TIMER MENU.
If “PLAY SET” appears in the display
panel, press / repeatedly to
select “CLOCK SET”, then press
.
3 Press / repeatedly to set the
hour, then press .
4 Press / repeatedly to set the
minutes, then press .
Changing the display
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
Changing the display mode