21
GB
Painting the Speaker Enclosure
1
Before painting, follow the instructions in
steps 1 through 3 in “Painting the Speaker
Grille” (page 19) to remove the outer lid and
the speaker grille, and then wipe clean the
speaker enclosure.
Do not file the speaker enclosure.
2
Spray the paint over the speaker enclosure.
Note
• To prevent the speaker units and the connection
terminals from being exposed to the paint, cover them
with a masking material before painting.
• While painting, keep the speaker units untouched.
• Be sure to let the paint completely dry.
3
Attach the outer lid and the speaker grille,
which you removed in steps 1 through 3 in
“Painting the Speaker Grille” (page 19), back
into position, and then secure them with the
screws.
When attaching the speaker grille, align its end
with the speaker end, and then slide in the
speaker grille along the speaker enclosure.
To Next Page
Loading...
