Sony SLT-A35 - Preparing the Camera; Setting up the Date

30
Preparing the camera
When you turn the camera on for the first time, the date/time setup screen
appears.
Setting up the date
1 Set the power switch to ON to turn
the camera on.
The screen used for setting date and time
appears.
• To turn the camera off, set it to OFF.
2 Verify that [Enter] is selected on
the LCD monitor, then press the
center of the control button.
3 Select your area with b/B on the control button, then press the
center of the control button.
4 Select each item with b/B and
set the numeric value with v/V.
[Daylight Svg.:]: Turns on or off the
daylight saving time setting.
[Date Format:]: Selects the format to
display date.
• Midnight is indicated as 12:00 AM, and
noon as 12:00 PM.