60
Shooting with the automatic setting
The “AUTO” mode allows you to easily shoot any subject under any
conditions because the camera makes appropriate judgments on the
situation to adjust the settings.
Select when shooting in a location where the use of a flash is restricted.
Shooting with appropriate settings automatically
1 Set the mode dial to or
(Flash Off).
2 Hold the camera and look into the LCD monitor or viewfinder.
3 Overlay the AF area on the
desired subject.
• If the (Camera shake warning)
indicator flashes, carefully shoot the
subject, holding the camera steady, or
by using a tripod.
AF area
4 When using a zoom lens, turn the
zoom ring, then decide on your
shot.
or
(Camera shake warning)
indicator
Zoom ring
To Next Page
Loading...
